Under the Turkish Food Codex Communiqué on Honey, HMF in blossom and honeydew honey may be at most 40 mg/kg, moisture at most 20% (23% in heather and erica honeys), and the diastase number at least 8. HMF and diastase show whether the honey has been heated and how it has been stored, while moisture indicates the risk of fermentation. These three values do not answer whether the honey has been blended with sugar syrup.
What is HMF, and what should it be in honey?
HMF (hydroxymethylfurfural) is a compound formed as the sugars in honey break down with heat and time. It is low in fresh honey and rises as honey is heated or kept warm. When you look at a honey's freshness and thermal history, it is the first value you read.
The limits in Annex 1 of the Communiqué:
- Blossom honey, honeydew honey and blends of the two: no more than 40 mg/kg
- Honeys from tropical countries whose region of production is stated on the label: no more than 80 mg/kg
- Baker's honey: no HMF limit applies
The Communiqué also states that ambient temperature is to be taken into account when HMF and diastase are assessed. Honey sitting in a cool store and honey carried in a closed truck in summer do not change at the same rate.
What does the diastase number show?
Diastase is an enzyme that bees add to honey, and it is heat-sensitive; its activity falls as honey is heated. The Communiqué prohibits heating honey in a way that destroys or significantly inactivates its natural enzymes.
The lower limit is generally 8. In honeys with a naturally low enzyme content, such as citrus honey, and with HMF not exceeding 15 mg/kg, it drops to 3. The exception shows that low diastase does not always mean heating; it can also come from the honey's botanical source.
The two values are read together. Where HMF is high and diastase is low, heat treatment or poor storage becomes more likely.
The EU Honey Directive specifies that diastase activity is expressed on the Schade scale and that HMF and diastase are determined after processing and blending. In trade this has a concrete consequence: a honey that was within the limit when bought from the producer can fall outside it in the final product if it is heated during blending and filling. Batches with values close to the limits therefore need separate monitoring through filling.
What should moisture be in honey?
Moisture determines honey's shelf life. Honey with high moisture ferments more easily; the Communiqué prohibits the sale of honey that has begun to ferment.
- Blossom honey, honeydew honey and their blends: no more than 20%
- Heather and erica honeys: no more than 23%
- Baker's honey: no more than 23%; 25% for baker's honey from heather and erica
Honey taken early, from comb the bees have not yet ripened and capped, can retain high moisture. That is a question of ripeness and quality; it is not adulteration.
How can you tell heated honey, and what does raw honey mean?
Heated honey cannot be identified by eye; its thermal history shows through HMF and diastase measurements. Warming crystallised honey to make it fluid is common practice, and if temperature and time are not controlled both values are directly affected.
Under the Communiqué, "raw honey" (ham bal) is honey not heated above 45 °C and strained through a filter with openings larger than 0.3 mm. There is a storage rule as well: honey must be kept in a clean, dry, odour-free place out of direct sunlight, at 25 °C or below, including during distribution.
If these values are compliant, is the honey natural?
No. HMF, moisture and diastase are quality and freshness parameters. A honey blended with syrup can stay within all three limits if it was produced recently and stored correctly. The Communiqué has other criteria for investigating added syrup: the sugar profile, the δ13C value and the C4 sugar share. Electrical conductivity, free acidity and proline add further information about the honey's composition.
We explain how these criteria separate syrup from honey in our post on fake honey, and their counterparts in the EU Directive in our post on exporting honey to the EU.
Where does Beevex fit in this picture?
HMF, moisture and diastase are measured in an accredited laboratory. Beevex does not measure these values, nor floral source; the question it looks at is added syrup. In a packing plant the assessment is made with a five-drop sample before the honey enters the filling line. The result is recorded against the batch as genuine, questionable or syrup added, and a questionable batch is set aside for laboratory confirmation. Beevex does not replace laboratory analysis.
You can see how it is used in packing plants on the sector page and the method on the technology page.


