A honey purity test in the field shows at the intake point, before the batch is emptied into the tank, whether the honey is genuine, questionable or contains added syrup. A honey test kit works with a five-drop sample and a phone camera, and the result is tied to the batch within minutes. The decision the kit supports is a commercial one: accept the batch, set it aside, or send its sample to the laboratory. Floral source, HMF, moisture, diastase, residues and any official conformity verdict are settled in a laboratory; the test kit does not replace them.
How is a field test kit different from home tests?
Search for "how to spot fake honey" and the lists you find start with the water, match, spoon and crystallisation tests and end with "only a laboratory can say for sure". The result of those tests is driven by the honey's moisture, floral source and the ambient temperature; they say nothing about added syrup. We cover the detail in our post on fake honey.
A company that collects, packs or exports honey is asking a different question. In front of it is not a jar but a vehicle on the weighbridge and a batch delivered in drums. Sending every batch to the laboratory stops intake; sending none leaves the decision to the declaration. A field test kit is the step between the two.
What does a honey test kit measure, and what does it not?
The question Beevex looks at is added syrup. The result is not a chart that needs interpreting but one of three classifications: genuine, questionable or syrup added. The classification sets the next step.
Questions the kit does not answer, and where they are investigated:
| Question | Where it is investigated |
|---|---|
| Which syrup was added, and how much? | In the laboratory; δ13C and C4 analysis looks for corn and cane sugar, and other syrup types need advanced methods |
| Has the honey been heated or badly stored? | HMF and diastase analysis |
| Is moisture within the Communiqué limit? | Moisture analysis |
| Is the floral or regional claim right? | Pollen analysis and conductivity |
| Are there residues? | Antibiotic and naphthalene screening |
We cover which syrups C4 analysis catches and which it cannot see in our C4 post, and every line of the report in our analysis report post. Floral source and regional information are not measured by Beevex; they are kept as your declaration on the same record as the reading.
How does a field test relate to official analysis?
Under Article 5 of the Turkish Food Codex Communiqué on Honey (No. 2020/7), no food ingredient, including food additives, and no external substance may be added to honey. Added syrup is therefore not a quality choice but a breach of the regulation.
Article 15 of the Communiqué sets out the official route: samples are taken according to the rules in the Turkish Food Codex Regulation, and internationally accepted analysis methods are applied to the products. An amendment in 2023 (No. 2023/37) added the concept of a "decision criterion" and a new Article 15/A. To detect whether an external substance has been added to honey, the decision criteria announced on the Ministry's official website are used. The announcement states the parameter, the criterion, the reference of the analysis method and the application date; a criterion starts to apply in official controls three months after it is announced.
A field test kit is not one of the analysis methods in this framework. A reading cannot be used as an official control result or as an accredited laboratory report. A report on a sample a company sends on its own initiative has limits too: the Regulation on Food Control Laboratories calls these "special request samples", and the last page of such reports states that they may not be used for judicial and administrative proceedings or for advertising. A field reading follows the same logic: it is the company's record of its own intake decision.
How is the test run at the intake point?
The Beevex kit contains an amber 30 ml dropper bottle of pH-standard liquid, four glass droppers, a white dish and a short guide setting out the steps. Every kit is single use; the number of kits remaining is shown in the app. No separate device is needed; the reading is made with the mobile devices already in use at your organisation.
- Identify the batch. Enter the batch number, the supplier and the declared floral source in the app. Do not combine honey from different producers in a single reading.
- Take the sample from the batch. The reading uses five drops and describes the honey those drops came from. If the batch is spread over several drums, record which drum the sample came from. Set aside a sealed retention sample from the same batch.
- Do not heat crystallised honey. Heating directly affects HMF and diastase; if the batch later needs to go to the laboratory, those values will already have been changed.
- Prepare the kit. Put the kit's liquid into the white dish as described in the guide.
- Add the honey. With a glass dropper, place five drops of honey onto the liquid in the dish.
- Photograph twice. The app photographs the dish from above twice: first the drops as first applied, then after the drops have merged with the liquid. Interpretation is not left to the user.
- Tie the result to the record. The result appears on the same screen and is saved to your account with the batch, supplier, date and image data. If there is no connectivity in the field, the assessment completes once a connection is available.
The sample is five drops; the batch is not opened and no product is lost. The reading is made while the vehicle waits on the weighbridge.
How is the result turned into an intake decision?
The rules written at the start of the season make the decision, not the reading. When those rules are applied the same way to every batch, two batches from the same producer are not treated differently.
| Reading result | Decision at intake | Next step |
|---|---|---|
| Genuine | Accept | The reading is tied to the batch and the honey goes into the tank |
| Questionable | The batch is not emptied into the tank and is held separately | Sealed sample to an accredited laboratory, requesting the analysis that fits the syrup question |
| Syrup added | The batch is not taken into the tank | The result is shared with the producer the same day; the retention sample is kept sealed and laboratory confirmation is requested if the result is challenged |
Order matters: the reading has to happen before the batch is emptied into the tank. Once honey has joined earlier batches it cannot be separated again. We set out the stages of the acceptance decision and their effect on the producer relationship in our intake decision post.
For a questionable batch the field reading shows a suspicion; the laboratory gives the verdict. The Ministry of Agriculture and Forestry publishes the list of its own food control laboratories and of private laboratories it has authorised. When choosing a laboratory, ask in advance whether the analysis is within its accreditation scope for honey and how long it takes; we cover the choice in detail in our post on where to test honey. The batch number on the sample label should match the number in the intake record, so that when the report comes back the field reading and the report can be set side by side for the same batch.
Who is a test kit suited to?
- Collection centres and intake points: assess the incoming batch while the vehicle waits and decide at the gate whether it goes into the tank.
- Packing plants: confirm a batch's authenticity before it enters the filling line and track supplier consistency.
- Exporters: choose before dispatch which batch goes to the laboratory. The analysis certificate the buyer asks for still comes from an accredited laboratory.
In every case laboratory cost falls on the batch that carries a suspicion, not on the whole volume. See how collection centres use it on our sector page.
Frequently asked questions
Can a test kit result be used as evidence in a dispute?
A field reading is neither an official control result nor an accredited laboratory report. In a dispute, what counts is a properly taken sample and its laboratory analysis. The reading record is an internal record showing which batch you accepted and on what information.
Does a "genuine" result mean the honey complies with the Communiqué on Honey?
No. The reading looks at the syrup question. Moisture, HMF, diastase, the sugar profile and the other criteria in the Communiqué are measured separately in a laboratory.
Does using the kit require laboratory experience?
No. The steps are shown in sequence in the app; field staff can start using the kit the day it is received.
Sources
- Turkish Food Codex Communiqué on Honey (No. 2020/7), Official Gazette, 22 April 2020, issue 31107 (Articles 5 and 15)
- Communiqué Amending the Turkish Food Codex Communiqué on Honey (No. 2023/37), Official Gazette, 24 November 2023, issue 32379 (Articles 1, 2 and 3)
- Regulation on Food Control Laboratories, Official Gazette, 18 February 2022, issue 31754 (Articles 4 and 25)
- Ministry of Agriculture and Forestry, affiliated and authorised food control laboratories


